What's New E10.0

Click on the PDF below for more detail.

What's New Videos

What's new in Cimatron E10- CAD for Tooling

Modeling: Curves

RC010 2D Bounding Box 10.06.2011

This video was recorded by using Cimatron E10.
The function of 2D Bounding Box including has various uses, including punch design & manufacturing.
WWW.MYGROWTECH.COM

RC005 Mid Curve 10.06.2011

Cimatron E10 has a new capability to create a middle curve, that represent the middle of two planar curves or wires.
WWW.MYGROWTECH.COM

RC003 Approximate to Arcs & Lines 10.06.2011

This is Approximate to Arcs & Lines exercise.
This video will show you the improvement of Approximate Arcs & Lines in Cimatron E10.
This feature allow users to prepare geometry for cutting with wire EDM machines.
WWW.MYGROWTECH.COM

Modeling: Faces

RC011 Sharp Corner 10.06.2011

This video was recorded by using Cimatron E10.
This is new modeling tool.
It save time & improve quality when creating parting surface.
WWW.MYGROWTECH.COM 

RC013 Fillet Enhancement 10.06.2011

This video was recorded by using Cimatron E10.
In Cimatron E10, users have the option to perform a surface chamfer as part of the fillet feature.
Besides, the quality and performance of fillet is even better. So that users can handle complex geometries quickly & effectively.
WWW.MYGROWTECH.COM 

RC012 Extend Planar & Cone (Same Face)  10.06.2011

This video was recorded by using Cimatron E10.
The same face option is new additional option.
This option allow users to produce smoother extension with fewer faces by extending the original faces themselves where possible.
WWW.MYGROWTECH.COM 

Modeling: Solid

RC038 Extrude & Taper 04.07.2011

Extrude enhancement provide increase flexibility when extruding on both sides of a contour.
While the enhancement of taper function provide additional flexibility and facilitate faster work, include both side taper, split face, etc.
WWW.MYGROWTECH.COM

RC004 Fair on Solid 10.06.2011

This is Fair on Solid video.
This video was recorded by using Cimatron E 10.
This function allow fair objects, wires, edges, and curves and keep the result solid.

WWW.MYGROWTECH.COM

 

RC014 Unbend Pipe 10.06.2011

This video was recorded by using Cimatron E10.
In Cimatron E10, users can unbend the pipe with different angle.
This is new function.
WWW.MYGROWTECH.COM

Sketcher

RC017 Sketcher 13.06.2011

In Cimatron E10, various function were added to the sketcher such as Grid and Snap.
Others function now have more automation to enable faster drawing and provide users with a better user experience.
WWW.MYGROWTECH.COM

Drafting

RC026 TOH 17.06.2011

This is TOH exercise.
Several enhancement make it easy for users to create a more detailed TOH & include more information in the Label of Holes annotation.
WWW.MYGROWTECH.COM

RC027 Drafting Template 17.06.2011

This is new drafting template in Cimatron E10.
It is possible to automatically add BOM, TOH, ID number, LOH, groups & others sketches to create drawing.
WWW.MYGROWTECH.COM

Catalogs

RC009 Add Rules 10.06.2011

This is using add rules to add ejector and add cooling items &screws exercise.
This video was recorded by using Cimatron E10.
In Cimatron E10, you can applying certain rules regarding the location or size of the added components.
WWW.MYGROWTECH.COM

Analysis

  

RC025 Motion Analysis 17.06.2011

This video was recorded by using Cimatron E10.
Motion Analysis allow users to verify that mechanisms work properly, avoid unplanned collision, and in general improve the design process.
WWW.MYGROWTECH.COM

RC016 Export to Excel 10.06.2011

This video was recorded by using Cimatron E 10.
In Cimatron E 10, users are allow to create measurements reports in Excel.
Besides, users can choose which parameters to include in the report and can also include a custom screenshot, comments, & a company logo.
WWW.MYGROWTECH.COM

General CAD: Parametric Import

RC018 Parametric Import 14.06.2011

This is Parametric Import exercise.
This video was recorded by using Cimatron E10.
New Parametric Import option enable users to create a library of geometry features, reuse each one and modify dimensions on-the-fly.
WWW.MYGROWTECH.COM

General CAD: Geometry Function

RC015 Parallel Axis-Through Points 10.06.2011

This video was recorded by using Cimatron E10.
Now uses can create parallel axis by pick point.
WWW.MYGROWTECH.COM

What's new in Cimatron E10- DIE Design
Tool Design: Trimming Punch Creation

RC019 Enhancement in Trimming Punch 14.06.2011

This video is about Trimming Punch.
Several improvement have been made to the trimming punch function in Cimatron E 10.
WWW.MYGROWTECH.COM

What's new in Cimatron E10- Mold Design

Date Added: 24.06.2011

CM036 E10 (partial) Mold Design Demo

A quick mold design demonstration with a part that has defects in the part design.

Faster Parting: Quick Split Analysis

RC035 Quick Split Analysis  24.06.2011

The New Quick Split analysis tool in Cimatron E10 enable users easily check the validity of the split direction, detect problematic areas & analysis if the parting face are properly prepare & attached.
WWW.MYGROWTECH.COM

Mold Assembly: Insert Design

RC007 Extract Insert by Contour 10.06.2011

This is Extract Insert by Contour exercise.
This video was recorded by using Cimatron E10.
This is a new function that is available in Assembly environment and enable users to create insert parts in a much faster and automatic way.
It is useful both of mold and die makers.
WWW.MYGROWTECH.COM

RC008 Extract Insert by Contour  for Die 10.06.2011

This is Extract Insert by Contour for Die exercise.
This is a new function that is available in Assembly environment.
This video was recorded by using Cimatron E10.
This video will show you how to create an insert for die plates.
WWW.MYGROWTECH.COM

Mold Assembly: Cooling Enhancement

RC006 Cooling Improvement 10.06.2011

In Cimatron E10, the cooling design tool has been significantly improved.
This video will show you the improvement of cooling design.
WWW.MYGROWTECH.COM

Engineering Change Order (ECO)

RC036 Engineering Change Order (ECO) 24.06.2011

Enhancement to the Engineering Change Order (ECO) process offer a smoother, simpler way of handling & documenting changes to a project, and include support for multiple changes.
WWW.MYGROWTECH.COM

Mold Quote Generator

RC034 Mold Quote Generator 22.06.2011

Mold Quote Generator application helps mold makers achieve more accurate quotation by using project details which are available in Cimatron E Mold Design as well as cost-related details which are set by the mold maker based on experience.
WWW.MYGROWTECH.COM

What's new in Cimatron E10- NC General
Background Calculation

RC022 Background Calculation 15.06.2011

This is new concept of NC calculation in Cimatron E10 to make the work process faster and more efficient.
While the calculation are running users can start work on the next procedure and so on.
WWW.MYGROWTECH.COM

Cutter & Holder

RC033 Cutter & Holder 20.06.2011

In Cimatron E10, cutter & holder are separate entities & they are store in their own library.
Any number of libraries can be accessed from the NC document. Each 1 can be edited & save for future use.
WWW.MYGROWTECH.COM

Contour Enhancement

RC023 Nested Contour 16.06.2011

This enhancement shortens and simplifies programming by allowing users to perform machining that previously required 2 or more procedures in 1 single procedure.
WWW.MYGROWTECH.COM

User Experience: Removable R-Flag

RC020 Flag & Symbols 14.06.2011

This is flag & symbols exercise.
This video will show you the new display of the status Flag & Symbols in the NC Process Manager this video was recorded by using CimatronE 10.
WWW.MYGROWTECH.COM

Face Selection

RC024 Face Selection 16.06.2011

This video was recorded by using Cimatron E 10.
This video will show you the improved of Face Selection mechanism that has been develop for Cimatron E10.
WWW.MYGROWTECH.COM

Parallel Cut

RC028 Parallel Cut 20.06.2011

In Cimatron E10, there have new option that available in the Rough: Parallel & the Surface Milling: Finish function when selecting Machining Method: Parallel.
WWW.MYGROWTECH.COM

What's new in Cimatron E10- NC Strategies

2.5 Axis Milling: Additional Cutter Compensation

RC037 2.5 Axis Compensation 04.07.2011

In Cimatron E10, there are 2 different types of input for cutter compensation. The input into the machine can be the actual cutter's dimension or it can be the difference between the actual cutter & the programmed cutter.
WWW.MYGROWTECH.COM

Rough Operation: Enhancement to 'Second' Rough Operation

RC021 Stock Improvement 14.06.2011

This exercise is about the improvement made in the analysis of the previous stock in Cimatron E 10.
In Cimatron E 10, the topography of the bottom of the stock is also calculated.
WWW.MYGROWTECH.COM

Finish Operation: Hit Plane & Helical

RC029 Surface Milling (Hit Plane & Helical) 20.06.2011

Hit Horizontal Plane option ensure the part will be completely machine in 1 procedure when the wall in a part is interrupted by horizontal plane.
Helical option create a continuous spiral motion down the machine part with only 1 entry & exit point.
WWW.MYGROWTECH.COM

Finish Operation: Mix Optimized (Sort Top Down)

RC030 Surface Milling (Sort Top Down) 20.06.2011

New Mixed Optimized option in Cimatron E10 allow users to machine from top to bottom (higher surface to lower surface of a part).
This option is useful when there is a lot of stock to be remove such as in the 1st semi-finish operation.
WWW.MYGROWTECH.COM

Re-Machine Operation: Cleanup

RC031 Cleanup 20.06.2011

In CimatronE10, a new machining method was added to Cleanup function - ALL 3D STEP& a new parameter enable users to control the Slope Limit Angle.
WWW.MYGROWTECH.COM

Machine Simulation

RC032 Machine Simulation 20.06.2011

New Machining Simulation capabilities significantly advance the safety & efficiency of the NC programming Process.
Machining Simulation can also be used to verify 3-axis & 5-axis machining.
WWW.MYGROWTECH.COM

What's new in Cimatron E10- General
Product Manufacturing Information (PMI)

Date Added: 24.06.2011

CM037 CimatronE10 Motion Simulator

RC002 PMI 09.06.2011

This is Product and Manufacturing Information exercise.

This video will show you that PMI tool in Cimatron version 10 includes much more functionality than in previous version.

WWW.MYGROWTECH.COM